Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-RELEASE #0: Thu Jun 5 02:55:42 GMT 2003 root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc06d4000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06d426c. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 732712762 Hz CPU: Intel(R) Pentium(R) III Mobile CPU 1133MHz (732.71-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 Features=0x383f9ff real memory = 267845632 (255 MB) avail memory = 252780544 (241 MB) Pentium Pro MTRR support enabled npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard pcibios: BIOS version 2.10 Using $PIR table, 14 entries at 0xc00fdeb0 ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.FDC_._INI] (Node 0xc26258a0), AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__._INI] (Node 0xc261ca60), AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc261c280), AE_NOT_EXIST ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc261c280), AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc2620180), AE_NOT_EXIST ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc2620180), AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc26259e0), AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc2625a00), AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc2625a40), AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node 0xc2625900), AE_NOT_EXIST ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node 0xc2625900), AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc26259e0), AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc2625a00), AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc2625a40), AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.USB0.URTH.UNST._STA] (Node 0xc2625f20), AE_NOT_EXIST ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.USB0.URTH.UNST._STA] (Node 0xc2625f20), AE_NOT_EXIST acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc261c280), AE_NOT_EXIST ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc261c280), AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc2620180), AE_NOT_EXIST ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc2620180), AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc26259e0), AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc2625a00), AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc2625a40), AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node 0xc2625900), AE_NOT_EXIST ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node 0xc2625900), AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc26259e0), AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc2625a00), AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc2625a40), AE_NOT_EXIST ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.USB0.URTH.UNST._STA] (Node 0xc2625f20), AE_NOT_EXIST ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.USB0.URTH.UNST._STA] (Node 0xc2625f20), AE_NOT_EXIST acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: on acpi0 acpi_tz0: on acpi0 acpi_lid0: on acpi0 ACPI-1287: *** Error: Method execution failed [\\_SB_.LID_._PSW] (Node 0xc0eb74a0), AE_NOT_EXIST acpi_button0: on acpi0 ACPI-1287: *** Error: Method execution failed [\\_SB_.SLPB._PSW] (Node 0xc0eb7420), AE_NOT_EXIST pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 agp0: mem 0xd0000000-0xdfffffff at device 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) uhci0: port 0x1800-0x181f irq 11 at device 29.0 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x1820-0x183f irq 11 at device 29.1 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered aue0: LUA2-TX BUFFALO LUA2-TX, rev 1.10/1.01, addr 2 aue0: Ethernet address: 00:40:26:cb:59:f6 miibus0: on aue0 ukphy0: on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto uhci2: port 0x1840-0x185f irq 11 at device 29.2 on pci0 usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib2: at device 30.0 on pci0 pci2: on pcib2 cbb0: mem 0x50000000-0x50000fff irq 11 at device 0.0 on pci2 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: mem 0x51000000-0x51000fff irq 11 at device 0.1 on pci2 cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pci2: at device 2.0 (no driver attached) fxp0: port 0x6400-0x643f mem 0xc0200000-0xc0200fff irq 11 at device 8.0 on pci2 fxp0: Ethernet address 00:d0:59:33:ed:21 miibus1: on fxp0 inphy0: on miibus1 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: at device 31.3 (no driver attached) pci0: at device 31.5 (no driver attached) atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 fdc0: port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled acpi_ec0: port 0x66,0x62 on acpi0 acpi_cmbat0: on acpi0 acpi_cmbat1: on acpi0 acpi_acad0: on acpi0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled orm0: